HomeStore

V6 Hardcase LiPo 2S 7.4v 450mah 60C Battery 44.6 x 24 x 12.4mm (1-28 Mini-Z RX28 RC28 XBONE) [PN Racing] 733450

Product image 1
Product image 2
Product image 3

V6 Hardcase LiPo 2S 7.4v 450mah 60C Battery 44.6 x 24 x 12.4mm (1-28 Mini-Z RX28 RC28 XBONE) [PN Racing] 733450

V6 Hardcase LiPo 2S 7.4v 450mah 60C Battery 44.6 x 24 x 12.4mm (1-28 Mini-Z RX28 RC28 XBONE) [PN Racing] 733450

These batteries have a high voltage level under load, with low internal resistance.
Designed for use with 1/28 scale car
Important Note: This battery is a larger than standard, please check if your battery compartment is big enough to fit this battery. 


Specification
Voltage: 7.4V (2S)
Capacity: 450mAh
Recommend Charge Rate: 0.8A
C-rate: 60C
Plug: Mini Bullet Plug (come with 3 copper bullet plug)
Type: Rectangular 
Size: 44.6 x 24 x 12.4mm (Length x Width x Height) (+/-0.5mm)
Weight: 21.5g (+/- 0.1g)
Feature ports on both sides of the case, allowing the wire to exit from either the top or bottom for flexible mounting, 
Result in cleaner wiring, and better balancing in RC vehicles.
We recommend seal the unused side with tape or silicone for increased protection.
$9.45

Original: $26.99

-65%
V6 Hardcase LiPo 2S 7.4v 450mah 60C Battery 44.6 x 24 x 12.4mm (1-28 Mini-Z RX28 RC28 XBONE) [PN Racing] 733450

$26.99

$9.45

Product Information

Shipping & Returns

Description

These batteries have a high voltage level under load, with low internal resistance.
Designed for use with 1/28 scale car
Important Note: This battery is a larger than standard, please check if your battery compartment is big enough to fit this battery. 


Specification
Voltage: 7.4V (2S)
Capacity: 450mAh
Recommend Charge Rate: 0.8A
C-rate: 60C
Plug: Mini Bullet Plug (come with 3 copper bullet plug)
Type: Rectangular 
Size: 44.6 x 24 x 12.4mm (Length x Width x Height) (+/-0.5mm)
Weight: 21.5g (+/- 0.1g)
Feature ports on both sides of the case, allowing the wire to exit from either the top or bottom for flexible mounting, 
Result in cleaner wiring, and better balancing in RC vehicles.
We recommend seal the unused side with tape or silicone for increased protection.