Pillow Ball M3 (REVERSE THREAD) Screw Black ROD ENDS BALL STUD CUP (1 SET) [RC926] KN-CP02BK
***THESE ARE REVERSE THREAD**, TO MAKE A FULL SET FOR A TURNBUCKLE, YOU WILL NEED TO PURCHASE STANDARD THREAD ONES TOO (POSITIVE THREAD)
■ The colorful alumite color with the RC926 logo is recommended for dressing up! The colorful alumite color enhances the chassis to a higher level.
■ Aluminum CNC bearing Pillow ball M3 reverse screw is a highly versatile product with a stainless steel ball inserted in a lightweight and high-strength body.
■ Aluminum CNC bearing By providing a 0.5 pitch hole for M3 reverse screw at the end of the pillow ball body and changing it to the resin ball end of the RC car, it can be assembled on the reverse screw side of the turnbuckle or used for the knuckle support part. Is possible.
■ It is recommended for vehicles such as crawlers as well as drift cars.
■ Aluminum CNC bearing By making the surface of the pillow ball body without the RC926 logo 5 mm thick, it can be fixed with a spanner or the like.
■ Since this product is for reverse screw, a slit wire is inserted in the screwed part so that it can be distinguished for positive screw. ?
Product details
• Aluminum CNC bearing Pillow ball M3 reverse screw × 2
■ Size
・ Total length about 22.5 mm
・ Screw hole diameter M3 reverse screw 0.5 pitch Depth about 10 mm
・ Total length from the center of the stainless ball hole about 18 mm
・ Stainless ball hole diameter 3mm thickness 8 mm
· operating angle vertical state about 20 degrees, the maximum operating angle of about 40 degrees
to create a turnbuckle link, you will need to order some POSITIVE(REGULAR) Threaded ones:
■ The colorful alumite color with the RC926 logo is recommended for dressing up! The colorful alumite color enhances the chassis to a higher level.
■ Aluminum CNC bearing Pillow ball M3 reverse screw is a highly versatile product with a stainless steel ball inserted in a lightweight and high-strength body.
■ Aluminum CNC bearing By providing a 0.5 pitch hole for M3 reverse screw at the end of the pillow ball body and changing it to the resin ball end of the RC car, it can be assembled on the reverse screw side of the turnbuckle or used for the knuckle support part. Is possible.
■ It is recommended for vehicles such as crawlers as well as drift cars.
■ Aluminum CNC bearing By making the surface of the pillow ball body without the RC926 logo 5 mm thick, it can be fixed with a spanner or the like.
■ Since this product is for reverse screw, a slit wire is inserted in the screwed part so that it can be distinguished for positive screw. ?
Product details
• Aluminum CNC bearing Pillow ball M3 reverse screw × 2
■ Size
・ Total length about 22.5 mm
・ Screw hole diameter M3 reverse screw 0.5 pitch Depth about 10 mm
・ Total length from the center of the stainless ball hole about 18 mm
・ Stainless ball hole diameter 3mm thickness 8 mm
· operating angle vertical state about 20 degrees, the maximum operating angle of about 40 degrees
to create a turnbuckle link, you will need to order some POSITIVE(REGULAR) Threaded ones:
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Pillow Ball M3 (REVERSE THREAD) Screw Black ROD ENDS BALL STUD CUP (1 SET) [RC926] KN-CP02BK
Pillow Ball M3 (REVERSE THREAD) Screw Black ROD ENDS BALL STUD CUP (1 SET) [RC926] KN-CP02BK
***THESE ARE REVERSE THREAD**, TO MAKE A FULL SET FOR A TURNBUCKLE, YOU WILL NEED TO PURCHASE STANDARD THREAD ONES TOO (POSITIVE THREAD)
■ The colorful alumite color with the RC926 logo is recommended for dressing up! The colorful alumite color enhances the chassis to a higher level.
■ Aluminum CNC bearing Pillow ball M3 reverse screw is a highly versatile product with a stainless steel ball inserted in a lightweight and high-strength body.
■ Aluminum CNC bearing By providing a 0.5 pitch hole for M3 reverse screw at the end of the pillow ball body and changing it to the resin ball end of the RC car, it can be assembled on the reverse screw side of the turnbuckle or used for the knuckle support part. Is possible.
■ It is recommended for vehicles such as crawlers as well as drift cars.
■ Aluminum CNC bearing By making the surface of the pillow ball body without the RC926 logo 5 mm thick, it can be fixed with a spanner or the like.
■ Since this product is for reverse screw, a slit wire is inserted in the screwed part so that it can be distinguished for positive screw. ?
Product details
• Aluminum CNC bearing Pillow ball M3 reverse screw × 2
■ Size
・ Total length about 22.5 mm
・ Screw hole diameter M3 reverse screw 0.5 pitch Depth about 10 mm
・ Total length from the center of the stainless ball hole about 18 mm
・ Stainless ball hole diameter 3mm thickness 8 mm
· operating angle vertical state about 20 degrees, the maximum operating angle of about 40 degrees
to create a turnbuckle link, you will need to order some POSITIVE(REGULAR) Threaded ones:
■ The colorful alumite color with the RC926 logo is recommended for dressing up! The colorful alumite color enhances the chassis to a higher level.
■ Aluminum CNC bearing Pillow ball M3 reverse screw is a highly versatile product with a stainless steel ball inserted in a lightweight and high-strength body.
■ Aluminum CNC bearing By providing a 0.5 pitch hole for M3 reverse screw at the end of the pillow ball body and changing it to the resin ball end of the RC car, it can be assembled on the reverse screw side of the turnbuckle or used for the knuckle support part. Is possible.
■ It is recommended for vehicles such as crawlers as well as drift cars.
■ Aluminum CNC bearing By making the surface of the pillow ball body without the RC926 logo 5 mm thick, it can be fixed with a spanner or the like.
■ Since this product is for reverse screw, a slit wire is inserted in the screwed part so that it can be distinguished for positive screw. ?
Product details
• Aluminum CNC bearing Pillow ball M3 reverse screw × 2
■ Size
・ Total length about 22.5 mm
・ Screw hole diameter M3 reverse screw 0.5 pitch Depth about 10 mm
・ Total length from the center of the stainless ball hole about 18 mm
・ Stainless ball hole diameter 3mm thickness 8 mm
· operating angle vertical state about 20 degrees, the maximum operating angle of about 40 degrees
to create a turnbuckle link, you will need to order some POSITIVE(REGULAR) Threaded ones:
$13.99
Pillow Ball M3 (REVERSE THREAD) Screw Black ROD ENDS BALL STUD CUP (1 SET) [RC926] KN-CP02BK—
$13.99
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
***THESE ARE REVERSE THREAD**, TO MAKE A FULL SET FOR A TURNBUCKLE, YOU WILL NEED TO PURCHASE STANDARD THREAD ONES TOO (POSITIVE THREAD)
■ The colorful alumite color with the RC926 logo is recommended for dressing up! The colorful alumite color enhances the chassis to a higher level.
■ Aluminum CNC bearing Pillow ball M3 reverse screw is a highly versatile product with a stainless steel ball inserted in a lightweight and high-strength body.
■ Aluminum CNC bearing By providing a 0.5 pitch hole for M3 reverse screw at the end of the pillow ball body and changing it to the resin ball end of the RC car, it can be assembled on the reverse screw side of the turnbuckle or used for the knuckle support part. Is possible.
■ It is recommended for vehicles such as crawlers as well as drift cars.
■ Aluminum CNC bearing By making the surface of the pillow ball body without the RC926 logo 5 mm thick, it can be fixed with a spanner or the like.
■ Since this product is for reverse screw, a slit wire is inserted in the screwed part so that it can be distinguished for positive screw. ?
Product details
• Aluminum CNC bearing Pillow ball M3 reverse screw × 2
■ Size
・ Total length about 22.5 mm
・ Screw hole diameter M3 reverse screw 0.5 pitch Depth about 10 mm
・ Total length from the center of the stainless ball hole about 18 mm
・ Stainless ball hole diameter 3mm thickness 8 mm
· operating angle vertical state about 20 degrees, the maximum operating angle of about 40 degrees
to create a turnbuckle link, you will need to order some POSITIVE(REGULAR) Threaded ones:
■ The colorful alumite color with the RC926 logo is recommended for dressing up! The colorful alumite color enhances the chassis to a higher level.
■ Aluminum CNC bearing Pillow ball M3 reverse screw is a highly versatile product with a stainless steel ball inserted in a lightweight and high-strength body.
■ Aluminum CNC bearing By providing a 0.5 pitch hole for M3 reverse screw at the end of the pillow ball body and changing it to the resin ball end of the RC car, it can be assembled on the reverse screw side of the turnbuckle or used for the knuckle support part. Is possible.
■ It is recommended for vehicles such as crawlers as well as drift cars.
■ Aluminum CNC bearing By making the surface of the pillow ball body without the RC926 logo 5 mm thick, it can be fixed with a spanner or the like.
■ Since this product is for reverse screw, a slit wire is inserted in the screwed part so that it can be distinguished for positive screw. ?
Product details
• Aluminum CNC bearing Pillow ball M3 reverse screw × 2
■ Size
・ Total length about 22.5 mm
・ Screw hole diameter M3 reverse screw 0.5 pitch Depth about 10 mm
・ Total length from the center of the stainless ball hole about 18 mm
・ Stainless ball hole diameter 3mm thickness 8 mm
· operating angle vertical state about 20 degrees, the maximum operating angle of about 40 degrees
to create a turnbuckle link, you will need to order some POSITIVE(REGULAR) Threaded ones:
